Private Use Mailbox: 2000 Series- Rear Loading Module
Product Info
Construct a 2" x 4" frame as per below making sure that the frame is level.
Install the 2000 unit letting the bottom of the unit sit on the cross member.
Level the unit. Screw the unit into the frame.
*Note: The preferred method to mount the cross members is set the
cross member into a ¼" to 3/8" notch cut in the vertical uprights and screwed
or nailed in place.
Alternative methods: Cross member can be nailed or screwed to uprights.
Or brackets can be used to hold the cross members if no unit is to be mounted
above or below the bracket.
» Download pdf format for print:
2000 Installation.pdf
|
