USPS Approved Product |
Anodized Powder Coat |
Product Details
Combination units with USPS-required parcel boxes minimize
horizontal space and maximize freight savings. USPS STD-4C compliant
mailbox systems are mandatory on all new construction and major
renovations as of October ‘06.
More Security
- Exclusive “L” extrusion on
every door resists prying
-- 1/4” on control and parcel door; 3/16” on tenant doors.
- Concealed Hinges -- no
pry-points.
- Riveted shelves prevent entry
from an adjacent compartment.
- Master door 5-point stainless
steel lock with triple bolt catch prevents break-ins.
More Easily Installed
- 3/4” trim eliminates the need for
fillers between modules.
More Weather-Resistance
- Exclusive SMC Rain Guard System
allows installation in all weather conditions.
Installation
Instructions for Horizontal 4C SMC1-08
- UNIT IS FRONT HEAVY, USE CAUTION WHEN LIFTING
AND INSTALLING.
- BOX TO BE LAID FLAT. WHEN ITEM IS UPRIGHT,
BOX MAY TIP OVER AND CAUSE INJURY.
- WALL MOUNT OPENING SHOULD BE SQUARE AND OF
HIGH QUALITY TO ENSURE UNIT FUNCTIONS PROPERLY AND IS SECURE.
- UNIT MUST BE FULLY FRAMED WITH 2x4’s.
- 2x4 FRAME MUST BE FASTENED TO FLOOR.
- ½’’ THICK MAXIMUM DRYWALL OR SHEETROCK.
- CENTER OF THE UPPER MOST PATRON LOCK MUST BE
NO MORE THAN 67’’ FROM FLOOR.
- TOP SURFACE OF BOTTOM SHELF MUST BE NO LESS
THAN 15’’ FROM FLOOR.
- WITH THE MASTER DOOR OPEN AND THE HOLD-OPEN
DEVICE ENGAGED, MOUNT THE UNIT TO THE PREPARED FRAME USING THE
#10 x 1-1/4” SHEET METAL SCREWS PROVIDED. THE MOUNTING HOLES ARE
LOCATED ON ALL FOUR SIDES OF THE UNIT JUST BEHIND THE PERIMETER
TRIM.
|
TOOLS NEEDED:
- 1/8” Drill Bit
- Phillips Screwdriver
 |
|
|
