Compu-Lok® Mechanical
Sensitive material, computer data or mail distribution are distributed
from a central, secure area into locked compartments.
Compu-Lok® Features:
- Available as a key lock system when computerized control and audit trail
are not required.
- Mechanical operation (CLM series) a key is assigned for long term use.
- Available in a variety of sizes
Compu-Lok:
(Overall Height) W x D x H
(inches) (mm)
CLE-4,
CLM-4: |
(59), 18" x 17 x 12⅝
(1499mm), 457 x 432 x 321 |
CLE-5,
CLM-5: |
(72), 18" x 17 x 12⅝
(1499mm),
457 x 432 x 321 |
CLE-8,
CLM-8: |
(59), 18" x 17 x 6-1/16
(1499mm), 457 x 432 x 321 |
CLE-10,
CLM-10: |
(72), 18" x 17 x 6-1/16
(1829mm), 457 x 432 x 155 |
CLE-12,
CLM-12: |
(59), 18" x 17 x 3⅞
(1499mm), 457 x 432 x 98 |
CLE-15,
CLM-15: |
(72), 18" x 17 x 3⅞
(1829mm), 457 x 432 x 98 |
Statesman Compu-Lok
|
SCL-1: |
12" x 18 x 72
|
305mm x 457 x 1829 |
|
SCL-2: |
12" x 18 x 36
|
305mm x 457 x 914 |
|
SCL-3: |
12" x 18 x 24
|
305mm x 457 x 610 |
|
15" x 31 x 24 |
381mm x 787 x 610 |
|
19" x 31 x 24 |
483mm x 787 x 610 |
|
SCL-4: |
12" x 18 x 18
|
305mm x 457 x 305 |
|
15" x 18 x 18
|
381mm x 457 x 457 |
|
15" x 24 x 18
|
483mm x 610 x 457 |
|
15" x 31 x 18 |
381mm x 787 x 457 |
|
SCL-5: |
12" x 18 x 14-2/5
|
305mm x 457 x 362 |
|
12" x 21 x 14-2/5
|
305mm x 533 x 362 |
|
14" x 21 x 14-2/5
|
356mm x 457 x 362 |
|
SCL-6:
|
12" x 18 x 12 |
305mm x 457 x 305 |
Electronic Access System:
- Access control and locking system: Electronic lock activated by using keypad to enter personal identification code number.
- Codes: 7 digits
- Compartments: Each compartment accessed by programmed code number.
System can be programmed with four codes per compartment.
- Management code:
Allows immediate access to all compartments.
- Provide mechanical override in event of power failure
- System to provide computerized audit trail of usage and access
- Keypads can be mounted with in storage unit or as remote wall mount
Materials:
- Locker Body: Electro zinc coated steel sheet
- Front Frame and Doors: 16 GA.
- Top, Bottom, Shelves, and Other Components: 18 GA.
- Base, Door Handle, and Lock Assembly: Type 304 Stainless Steel
Fabrication: Completely factory
assembled by riveting frames and doors to body.
- Frame: Welded
overlapping construction with double material thickness for lock
housing
- Doors: Formed
from textured steel, Self-closing, and equipped with 2 stainless steel
hinges and stainless steel door closures and handle assembly
-Equip lockers with front and rear doors allowing through wall access
into secure property room
- Rear Doors: Full height of tier providing access to all compartments in tier
- Body: Flanged reinforced, and back ventilated
Options/Accessories:
- Fillers:
Finished metal trim to match lockers for closure and transition of lockers to adjacent surfaces
- End Panels: Finished end panels to provide coverage on exposed ends
- Base:4" (102mm) H and fabricated from stainless steel/li>
- Locker Numbers: Provide plastic or aluminum number plates with black numerals for lockers
- Mounting Hardware: Provide brackets, fasteners, and other hardware of type and size recommended
by manufacturer for type of substrate
Delivery: Specify date desired. FOB tailgate delivered at job site fully assembled
Cleaning: Wash
exposed surface using a solution of mild detergent in warm water,
applied with soft, clean cloths. Do not use abrasives.
Color(s): The body and door frame are Sandalwood with all doors being
Sand. An optional two-tone gray (platinum silver/slate) is also available
|
|
/
