Compu-Lok:
(Overall Height) W x D x H
(inches) (mm)
CLE-4,
CLM-4:
(59), 18" x 17 x 12⅝
(1499mm), 457 x 432 x 321
CLE-5,
CLM-5:
(72), 18" x 17 x 12⅝ (1499mm),
457 x 432 x 321
CLE-8,
CLM-8:
(59), 18" x 17 x 6-1/16
(1499mm), 457 x 432 x 321
CLE-10,
CLM-10:
(72), 18" x 17 x 6-1/16
(1829mm), 457 x 432 x 155
CLE-12,
CLM-12:
(59), 18" x 17 x 3⅞
(1499mm), 457 x 432 x 98
CLE-15,
CLM-15:
(72), 18" x 17 x 3⅞
(1829mm), 457 x 432 x 98
Statesman Compu-Lok
SCL-1:
12" x 18 x 72
305mm x 457 x 1829
SCL-2:
12" x 18 x 36
305mm x 457 x 914
SCL-3:
12" x 18 x 24
305mm x 457 x 610
15" x 31 x 24
381mm x 787 x 610
19" x 31 x 24
483mm x 787 x 610
SCL-4:
12" x 18 x 18
305mm x 457 x 305
15" x 18 x 18
381mm x 457 x 457
15" x 24 x 18
483mm x 610 x 457
15" x 31 x 18
381mm x 787 x 457
SCL-5:
12" x 18 x 14-2/5
305mm x 457 x 362
12" x 21 x 14-2/5
305mm x 533 x 362
14" x 21 x 14-2/5
356mm x 457 x 362
SCL-6:
12" x 18 x 12
305mm x 457 x 305
Electronic Access System:
Access control and locking system: Electronic lock activated by using keypad to enter personal identification code number.
Codes: 7 digits
- Compartments: Each compartment accessed by programmed code number.
System can be programmed with four codes per compartment.
- Management code:
Allows immediate access to all compartments.
Provide mechanical override in event of power failure
System to provide computerized audit trail of usage and access
Keypads can be mounted with in storage unit or as remote wall mount
Materials:
Locker Body: Electro zinc coated steel sheet
Front Frame and Doors: 16 GA.
Top, Bottom, Shelves, and Other Components: 18 GA.
Base, Door Handle, and Lock Assembly: Type 304 Stainless Steel
Fabrication: Completely factory
assembled by riveting frames and doors to body.
Frame: Welded
overlapping construction with double material thickness for lock
housing
Doors: Formed
from textured steel, Self-closing, and equipped with 2 stainless steel
hinges and stainless steel door closures and handle assembly
-Equip lockers with front and rear doors allowing through wall access
into secure property room
Rear Doors: Full height of tier providing access to all compartments in tier
Body: Flanged reinforced, and back ventilated
Options/Accessories:
Fillers:
Finished metal trim to match lockers for closure and transition of lockers to adjacent surfaces
End Panels: Finished end panels to provide coverage on exposed ends
Base:4" (102mm) H and fabricated from stainless steel/li>
Locker Numbers: Provide plastic or aluminum number plates with black numerals for lockers
Mounting Hardware: Provide brackets, fasteners, and other hardware of type and size recommended
by manufacturer for type of substrate
Delivery: Specify date desired. FOB tailgate delivered at job site fully assembled
Cleaning: Wash
exposed surface using a solution of mild detergent in warm water,
applied with soft, clean cloths. Do not use abrasives.
Color(s): The body and door frame are Sandalwood with all doors being
Sand. An optional two-tone gray (platinum silver/slate) is also available
Refer page to a friend
/
