Keyless Evidence Locker
Innovative technology makes the Keyless Evidence Locker a must for tamper-proof
security. The evidence is deposited into a free unlocked compartment.
Once the door is closed and the pin is pushed, the evidence is automatically
locked for processing. Evidence is then accessed by the property officer through
the secured rear door in the rear door model. With the front load keyless
model, evidence is accessed by the property officer from the front side.
Dimensions
|
W x D x H |
|
Inches |
mm |
|
One High |
12 x 18 x 72
15 x 18 x 72 |
305 x 457 x 1829
305 x 457 x 1829 |
|
Two High |
12 x 18 x 36
15 x 18 x 36 |
305 x 457 x 914
305 x 457 x 914 |
|
Three High |
12 x 18 x 24
15 x 18 x 24 |
305 x 457 x 610
305 x 457 x 610 |
|
Four High |
12 x 18 x 18
15 x 18 x 18 |
305 x 457 x 457
305 x 457 x 457 |
|
Five High |
12 x 18 x 14-2/5
15 x 18 x 14-2/5 |
305 x 457 x 366
305 x 457 x 366 |
|
Six High |
12 x 18 x 12
15 x 18 x 12 |
305 x 457 x 305
305 x 457 x 306 |
Tier Configurations
|
Available in single, double and triple tiers
- Depths customized to 31" D.
- Heights customized to 84" H
- Widths customized to 24" W
For customized sizes inquire for pricing... Please contact your
Sales Manager
for custom sizes and Mix and Match Frames
|
Mix
and Match Tiers and Compartments
|
|
Modular, painted steel, keyless lockers with front and rear door option
for securing, evidence.
Locks: Stainless steel assembly
- Method of operation: Free service with key drop to transfer key and
custody for evidence
- Key and cylinder removable for replacement
- Optional anti-key-turn-back feature
Materials: Locker Body: Cold rolled sheet steel of following min.
thickness:
- Frame, Doors, Handle: 16 GA
- Top, Backs and Shelves: 20 GA.
- Sides, Backs: 24 GA
- Bottom: 22 GA.
- Hinge: 14 GA
Galvanized Metal:
- Bottom Shelf and Base: 22 GA
Optional Materials
- Base: 18 GA
- Number Plate: Plastic
- Hook: 11 GA
- Sloping Top: 20 GA
Fabrication: Completely factory assembled by riveting frames and
doors to body.
- Frame: Welded overlapping joint construction with double material
thickness for lock and coin housing
- Doors: Formed from smooth finish, self-closing, without louvers,
and equipped with 2 stainless steel door handle assembly 180 degree door
swing.
- Body: All welded construction
- Coin Housing Mechanism: Stainless 304 nickel bearing stainless
steel secured in locker channel
- Number Plates: Recessed and riveted in door
Options:
- Fillers: Finished metal trim to match lockers for closure and
transition of lockers to adjacent surfaces
-
Sloping Tops
- Base: 4" galvanized black metal base 1" recess
Delivery: Will be considered to be required as soon as possible
(or specify date desired). FOB tailgate delivered at job site fully factory
assembled. All keys and cylinders are manufactured by the supplier.
Cleaning: Wash exposed surface using a solution of mild detergent in
warm water, applied with soft, clean cloths. Do not use abrasives.
|
|
