Visitor Locker
Canadian's Visitor Lockers are available in a medium and high security model
for law enforcement. The medium security system refunds patron's money
once belonging are retrieved. The high security system collects tokens
which are distributed by authorized personnel. The tokens, when inserted
into the locking mechanisms, release the key.
Specifications
Dimensions
|
W x D x H |
|
Inches |
mm |
|
One High |
12 x 18 x 72
15 x 18 x 72 |
305 x 457 x 1829
305 x 457 x 1829 |
|
Two High |
12 x 18 x 36
15 x 18 x 36 |
305 x 457 x 914
305 x 457 x 914 |
|
Three High |
12 x 18 x 24
15 x 18 x 24 |
305 x 457 x 610
305 x 457 x 610 |
|
Four High |
12 x 18 x 18
15 x 18 x 18 |
305 x 457 x 457
305 x 457 x 457 |
|
Five High |
12 x 18 x 14-2/5
15 x 18 x 14-2/5 |
305 x 457 x 366
305 x 457 x 366 |
|
Six High |
12 x 18 x 12
15 x 18 x 12 |
305 x 457 x 305
305 x 457 x 306 |
Tier Configurations
|
Available in single, double and triple tiers
- Depths customized to 31" D.
- Heights customized to 84" H
- Widths customized to 24" W
For customized sizes inquire for pricing...
Please contact us at (800)
494-9073
for custom sizes and Mix and Match Frames
|
Mix
and Match Tiers and Compartments
|
Keyed Visitor Lockers: Painted steel, keyed storage locker for
law enforcement facility visitors.
Locks: Stainless steel assembly. Lock
is provided with options for coin operation with coins refunded, with tokens,
or free service. Key cylinder removable for replacement
- Optional anti-key-turn-back feature
Materials: Locker Body: Cold rolled, electro-zinc coated sheet steel
of following min. thickness:
- Front Frame and Doors: 16 GA
- Top, Bottom, Sides, Backs and Shelves: 20 GA.; Sides 24 16 GA.
- Door Handle and Lock Assembly: ASTM A167. Type 304, commercial
grade stainless steel
- Base: 4" galvanized black metal base
Fabrication: Completely factory assembled by riveting frames and
doors to body.
- Frame: Welded overlapping construction with double material thickness
for lock and coin housing
- Doors: Formed from smooth stainless steel, self-closing, without
louvers, and equipped with 2 stainless steel outer hinge springs and stainless
steel door closure and handle assembly. 180 degree door swing increase actual
opening by 3/4"
- Body: Flanged, reinforced and back ventilated
- Coin Housing: Lower portion of lock channel with security type
interlocking door with pry-prevention flanges
Options:
- Stainless Steel Safety Pins or Wristbands attached to all keys
- Spare Lock Cylinders and Keys
- Key Numbering Set
- Fillers: Finished metal trim to match lockers for closure and
transition of lockers to adjacent surfaces
- End Panels: Finished end panels to provide coverage on exposed
ends
- Handicap Accessibilities
- Designer Lockers
- Sloping Tops
Delivery: Will be considered to be required as soon as possible
(or specify date desired). FOB tailgate delivered at job site fully factory
assembled. operation if desired. All keys and cylinders are manufactured by
the supplier.
Cleaning: Wash exposed surface using a solution of mild detergent in
warm water, applied with soft, clean cloths. Do not use abrasives.
|
|
